The Parts

3D Print

  • wireless-charger-bot.stl
    • print at 0.2mm
    • disable supports, the gap for the usb connector is small enough for bridging
  • wireless-charger-top.stl
    • rotate the top part 180 Degress
    • print at 0.2mm
    • switch filaments after 0.6mm (s.th. the first three 0.2mm layers have the same color as the bottom part)
    • use a transparent filament from layer 0.8
  • the blender source file wireless-charger.blend
    • to change the logo, remove the boolean modifier from the top layer
    • then modify the top layer

Electronics

  • the wireless charger base station, I used this